Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the door panel of an Audi A3

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Door trim panel

Let's see the disassembly of the door panel of an Audi A3 (left side). Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. With a lever we go to remove the plastic cover placed in the lower part of the handle (we unscrew the screws). Using a screwdriver, unscrew the screws of the upper lever of the door opening, unscrew the other screws on the door panel. With a lever we detach the clamping clips of the panel, we lever the same, at the end let's grab it with our hands and unhook it from the door. Let's reassemble everything by proceeding backwards.

Posted on 8 April 2020 by ScegliAuto

Video tutorial

Related tutorials

Removing the Audi A3 front door panel
Audi A3 (1996-2003 / MK 1, 8L) In this video tutorial we will see the instructions to remove the front door panel of an Audi A3 first series. First we open the door and unscrew the…
How to remove the left front door panel on Audi a3
How to remove the left front door panel on Audi a3
Audi A3 (2012-2019 / MK 3, 8V) We perform the disassembly of the left front door panel on Audi a3: disconnect the battery terminals in the engine compartment, unscrew the screws lo…
Removal of the left rear door panel on Audi A3
Removal of the left rear door panel on Audi A3
Audi A3 (1996-2003 / MK 1, 8L) Removal of the left rear door panel on Audi A3. With a screwdriver we unscrew the screws placed in the space on the left side of the door (after remo…

Other guides you may be interested in

How to Replace the Damaged Number Plate Bulb on Fiat 600

In this video, learn how to replace the damaged number plate bulb on a Fiat 600. Use a screwdriver or plastic lever to remove the number plate light unit located in the rear bumper of the car. Once the light unit is removed, extract the lamp holder with your hands, then disconnect the bulb from it. Fit the new bulb/LED (same size and voltage) into the lamp holder, then reassemble the light unit into the bodywork of the tailgate, pressing it until the clips lock automatically. Finally, test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos