|
Do it yourself
| |||
| ||||
How to replace the battery of the Audi A3 MK2
In this video, we will see how to replace the battery of the Audi A3 MK2: we open the front hood and the battery is located on the right side of the engine compartment. We will need to unscrew the mounting plate using a 13mm socket wrench with an extension, then we remove the plastic cover that covers the battery and disconnect the black negative terminal with a 10mm socket wrench, making sure to keep the terminal well away from the battery pole; only after that will we disconnect the red positive terminal. Now we can take the battery out of its housing, scrape the contacts with fine sandpaper to remove the oxide, then apply some copper grease to the terminals of the new battery to improve contact. We position the new battery and connect the positive terminal, then the negative one. We screw the mounting plate back in and replace the plastic cover; and that's it.
Posted on 26 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Audi A3
(2003-2013 /
MK 2, 8P)
Follow these instructions to disassemble and replace the battery of the Audi A3 remote key in simple and quick steps. First, take your remote and sta…
Audi A3
(2003-2013 /
MK 2, 8P)
Need to replace the battery in your Audi A3 key? Let’s look at how to replace the battery. Take your remote key and, using a screwdriver, pry between…
Audi A3
(2003-2013 /
MK 2, 8P)
Today we will explain how to replace the battery of the RS model remote control for the Audi A3. The battery we will use is a CR 2032. Pull up the to…
Other guides you may be interested in
|
Where is the Fuel Filter Located in a Volvo XC60?
In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.260
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |