Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to reset the service light of the Audi A3

Audi A3 - Video tutorial

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: -board computer
Operation: How to reset the service light of the Audi A3

In this new mini guide dedicated to your Audi A3 from 2012 we will describe the steps necessary to perform the manual reset of the service light. It will only take you a few seconds. First, go inside the car, insert the key and turn on the ignition. Immediately after, locate the button under the speedometer and pull it up. As soon as the new menu appears on the on-board computer mini display, pull it up again and release it as soon as a new menu appears. Finally, turn the instrument cluster off and on again to complete the reset procedure.


Posted on 17 May 2024 by ScegliAuto

    Frequently Asked Questions

    • A3 2012-2019 - What does the TPMS warning light on the Audi A3 indicate? Read Answer
    • A3 2003-2013 - How many liters is the reserve of the Audi A3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos