Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Low Beam Bulb of the Audi A4 Headlight

Model: Audi A4 B8 - Years 2007-2016
Part: Headlight bulb

Today, you will learn how to remove and replace the low beam bulb of the Audi A4 headlight, following the instructions below. First, open the hood of your car and start by unscrewing the mounting screws of the headlight to remove it from the vehicle; then, remove the plastic cover and disconnect the bulb's electrical connector, as shown in the video. At this point, replace the low beam bulb with a new one that has the same base; secure it to the housing to reassemble it back onto the vehicle!

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on an Audi A4
How to Replace the Headlight Bulb on an Audi A4
Audi A4 (2000-2004 / B6) In a few simple steps, discover how to replace the low beam headlight bulb on an Audi A4. First, open the hood of the vehicle and disconnect the elec…
Replacing Low Beam Bulb on Audi A4 B6
Replacing Low Beam Bulb on Audi A4 B6
Audi A4 (2000-2004 / B6) Lift the hood and insert the support rod. Remove the three Torx screws shown in the video that secure the headlight (two are located above the front …
Replacing the Left Front Turn Signal Bulb on an Audi A4
Replacing the Left Front Turn Signal Bulb on an Audi A4
Audi A4 (2007-2016 / B8) Let's see how to replace the left front turn signal bulb on an Audi A4. Open the hood and secure it; remove the plastic cover above the grille. Disas…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos