Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Audi A4 B8 Fuse Box Diagram

Model: Audi A4 B8 - Years 2007-2016
Part: Fuse box

This brief video guide shows all the fuse diagrams, including names, locations, and operating amperage for each fuse in an Audi A4 B8, produced from 2007 to 2016. This tutorial also covers the exact locations of the fuse boxes. The first two fuse boxes are located inside the vehicle's cabin, on opposite sides of the dashboard behind a plastic panel that needs to be removed. The third fuse box is located in the trunk on the right.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse Layout and Location for the Audi A4
Fuse Layout and Location for the Audi A4
Audi A4 (2000-2004 / B6) This guide will help you locate the fuse layout and positioning for the Audi A4. First, locate the interior fuse box; it is found on the side of the …
Fuse Diagram and Location for the Audi A4
Fuse Diagram and Location for the Audi A4
Audi A4 (1994-2000 / B5) Today, let's look at the diagram and location of the fuse boxes for the Audi A4, following the instructions below. First, open the driver's side fron…
Fuses Layout and Placement for the Audi A4
Fuses Layout and Placement for the Audi A4
Audi A4 (1994-2000 / B5) In this guide, we will look at the layout and placement of the fuse boxes for the Audi A4, following the instructions below. First, open the front do…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos