Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the radio of the Audi A3?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Warning light – error code

To perform a reset of the MMI radio in the Audi A3, you need to turn on the instrument panel using the appropriate key so that you can use the controls located on the center console of the vehicle. Specifically, you will need to simultaneously press and hold the MENU button, the circular button, and the button with the arrow pointing upward to the right. After a few seconds of holding all the buttons simultaneously, you will notice that the radio will be reset and all settings will be restored. At this point, you can turn off the instrument panel.

Posted on 15 November 2023 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the radio on the Audi A3
Disassembly of the radio on the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) How to disassemble the radio of our Audi? Let's see the disassembly of the radio and the assembly of the new one on the Audi A3. Insert the keys into…
How do you reset the radio in an Audi A3?
How do you reset the radio in an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) To reset the radio on an Audi A3, you need to turn on the instrument panel by turning the key in the ignition switch. Once the panel is on, you can p…
Remove Radio from Audi A3
Remove Radio from Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Replace the radio in an Audi A3 if it is damaged. Use the original metal keys to remove the radio. Insert the keys into the spaces under the plastic …

    Frequently Asked Questions

    • A3 2020-2027 - Where is the meaning of the lights on the Audi A3 2021? Read answer

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos