Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the CV Boot on Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Axle shaft

See other generations:
Video tutorial

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel.

Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands.

Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

How to Replace the CV Joint Boot on the Old Fiat Panda
How to Replace the CV Joint Boot on the Old Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) If you hear a noise coming from the wheel, especially when steering, it is likely that the CV joint of the driveshaft is operating without grease due…
Removing the Gear Knob on Fiat Panda
Removing the Gear Knob on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the gear knob on the second series Fiat Panda? Let's see how to remove the knob and the trim gaiter. Detach the frame where the leather…
Removing the Front Driveshaft Boot on Fiat Panda 4x4
Removing the Front Driveshaft Boot on Fiat Panda 4x4
Fiat Panda (1980-2003 / MK 1, 141) See how to replace the boot on the driveshaft of the legendary Fiat Panda 4x4. First, remove the brake caliper by taking out the bolt that holds it i…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos