Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Panda
  6. : How to replace the hubcap of the Fiat Panda.

Fiat Panda - Video tutorial

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Wheel
Operation: How to replace the hubcap of the Fiat Panda.

Let's see how to replace the hubcap of a Fiat Panda. Being made of synthetic material and slightly protruding from the rubber wheel, hubcaps are prone to breaking easily. First, we need to partially lift the car with a hydraulic jack. It is important to never fully rely on the car jack when performing this type of work. Loosen the bolts and then unscrew them completely. In this specific case, the hubcap is held in place by the wheel bolts themselves. Take the new hubcap, making sure to correctly position the hole over the inflation valve. Screw the bolts by hand and tighten them to 110 Nm using a torque wrench. Lower the car. Operation completed.


Posted on 6 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Panda 2012-2023 - How much does the spare wheel on the Fiat Panda cost? Read Answer
    • Panda 2012-2021 - What is the tightening torque of the wheel bolts of the Fiat Panda? Read Answer
    • Panda 2012-2021 - Where is the spare wheel located in the Fiat Panda Hybrid? Read Answer
    • Panda 2012-2021 - How much does the Fiat Panda spare wheel cost? Read Answer
    • Panda 2012-2023 - How much does the Fiat Panda spare wheel cost? Read Answer
    • Panda 2012-2023 - Where is the spare wheel on the Fiat Panda? Read Answer

How to open the Piaggio Beverly saddle with a flat battery

In today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run.

Watch the video!


by ScegliAuto

More videos