Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove a Wheel from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Wheel

Let’s see how to remove a wheel from a Fiat Panda. Open the boot and take the wheel removal kit, which includes: jack, removal lever, screwdriver, wheel nut key (if present), telescopic spanner, and spare wheel. Position the jack under the car's jacking point (under the stiffest part of the chassis), lift the car slightly and loosen the wheel nuts. Raise the car with the jack lever, unscrew the nuts, and pull the wheel off the hub. Fit the spare wheel onto the hub with the respective nuts and lower the car to the ground. Always remember to store the removal kit with all its parts back in the boot.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Auxiliary Belt on a Fiat Panda
How to Replace the Auxiliary Belt on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, lift the front of your Fiat Panda. Begin by unscrewing and removing the bolts securing the right front wheel, then take off the whee…
How to Remove the Centre Tunnel from a Fiat Panda
How to Remove the Centre Tunnel from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the centre tunnel from a Fiat Panda? Use a plastic lever to pry off the trim located at the bottom of the centre tunnel, and remove the…
Removing the Front Bumper from a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Hello everyone! In this tutorial, you will learn how to remove the front bumper from an old model Fiat Panda. Although it is possible to remove the b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos