Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program a new key for the Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Key

See other generations:
Video tutorial

The duplication of a car key, in this case a Fiat Panda, but this operation is valid for all Fiat keys, including the Fiat 500 shown in the video, is done as shown in this video tutorial, professionally and using specialized centers. Through a code reading device, in which the Master key must be inserted, we proceed as follows: We know the code of the Master key just mentioned, with a mobile reader we go to the car to read the code of the ECU, this is inserted into the device mentioned before and then copied, completing the work, the code is copied into the microchip of the slave key, following the indicated procedure.


Posted on 25 May 2025 by ScegliAuto


Related tutorials

How to Program the Key for a Fiat Panda?
How to Program the Key for a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To program the key for a Fiat Panda, insert the key you wish to program into the ignition switch, turning it to position two to power on the dashboar…
How to Replace the Wiper Blades on the Fiat Panda?
How to Replace the Wiper Blades on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the wiper blades on the Fiat Panda, press the hook that secures the blade to its arm and remove the blade itself. To fit the new blade, si…
How to replace the rear wiper on a Fiat Panda?
How to replace the rear wiper on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear wiper on a Fiat Panda, lift the plastic cover at the base of the wiper and loosen the nut underneath using a 10 mm spanner. This …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos