Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to replace the rear wiper on the Fiat Panda?

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Windscreen wipers
Operation: How to replace the rear wiper on the Fiat Panda?

In order to replace the rear wiper of the Fiat Panda you need to lift the plastic cover located at the base of the wiper and loosen the nut underneath, using a 10 wrench. In this way the wiper arm and the relative blade, they can be removed. Then it will be possible to position the new arm, inserting its base inside the pin and fixing everything with the relative nut previously removed. At the end of the replacement, it will be possible to lower the plastic cover and check the correct functioning of the wiper.


Posted on 26 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Panda 2003-2012 - How do you operate the Fiat Panda wipers? Read Answer
    • Panda 2003-2012 - What to do if the wipers do not activate in the Fiat Panda? Read Answer
    • Panda 2012-2023 - Where is the wiper water tank located in the Fiat Panda? Read Answer
    • Panda 2003-2012 - Why are the Fiat Panda wipers not working? Read Answer
    • Panda 2012-2023 - Why does the Fiat Panda wiper not work? Read Answer
    • Panda 2012-2023 - Where can you top up the washer fluid in the Fiat Panda? Read Answer
    • Panda 2003-2012 - What is the windshield fuse on Fiat Panda 169? Read Answer
    • Panda 2003-2012 - Where does the Fiat Panda wiper fluid go? Read Answer
    • Panda 2003-2012 - How to turn on the Fiat Panda wipers? Read Answer
    • Panda 2003-2012 - Where is the Fiat Panda 169 windshield washer pump located? Read Answer
    • Panda 2012-2023 - Where is the Fiat Panda wiper fluid reservoir located? Read Answer

How do you replace the battery of the BMW R 1250 GS?

In order to replace the battery of the BMW R 1250 GS it is necessary to loosen the bolts that secure the casing positioned on the left side of the bike, so that its cover can be removed. Once this has been removed, you will be able to access the components below, including the battery. The latter must be removed from its housing by disconnecting the power cables and unscrewing the appropriate fixing bolts. In this way it will be possible to insert a new battery, properly fixing it and connecting it to the relative cables, covering everything with the casing.

Watch the video!


by ScegliAuto

More videos