Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light in a Fiat Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Tail light

Before you start, open the boot of your Fiat Panda. Begin by unscrewing and removing the screws that secure the rear light to the vehicle. Then, disengage the rear light. This will free the rear light itself. Proceed to disconnect the corresponding electrical connector. Once you have completed this step, you will have finished the disassembly. To fit the new rear light in your Fiat Panda, simply reverse these instructions, and you will have completed the replacement.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light bulb of the Fiat Panda 3
How to replace the rear light bulb of the Fiat Panda 3
Fiat Panda (2012-2026 / 319, MK 3) To quickly and safely replace the rear headlight bulb of your Fiat Panda third series, you need to follow all the steps described in this new guide. …
How to Replace the Rear Light Bulb of the Fiat Panda?
How to Replace the Rear Light Bulb of the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear light bulb on the Fiat Panda, open the tailgate to access the screws securing the light unit. These screws are located at the top…
How to Replace the Rear Light Bulb on a Fiat Panda?
How to Replace the Rear Light Bulb on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear light bulb on a Fiat Panda, open the boot to access the two bolts located between the seal and the light. Once these are loosened…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos