Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Tail light bulb

Today we will discover step-by-step instructions on how to disassemble and replace the bulbs of the rear light of the Fiat Panda. First, open the rear hatch of the trunk and start unscrewing the fixing screws found on the sides, then disconnect the electrical connector of the bulbs to remove the taillight from the body; then separate the bulb holder from the light fixture, thus accessing all the bulbs of the headlight, as shown in the video. At this point, replace any faulty bulbs with new ones, finally reassembling the rear light!

Posted on 6 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front position light bulb of the Fiat Panda
How to replace the front position light bulb of the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) The information provided in this guide will show us the process of disassembly and replacement of the front headlight position bulb of the Fiat Panda…
How to replace the front headlight bulb of the Fiat Panda
How to replace the front headlight bulb of the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Replacing the headlight bulb of the Fiat Panda is a simple and quick operation that can be done independently. To replace the bulb, we need to open t…
How to replace the third brake light bulb of the Fiat Panda
How to replace the third brake light bulb of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the third brake light of the Fiat Panda, start by opening the trunk; once the trunk is open, you will find a cover in the center of the gl…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos