Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box located in the hood of the Fiat Panda?

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Body

The Fiat Panda has two fuse boxes inside, but today we will specifically see the box located inside the front hood, which is specifically on the left side of the battery, next to the windshield washer fluid tank. In case it is necessary to replace one of the fuses inside the box, we must unscrew the screw that locks the opening and then open the cover of the box. To replace a fuse, we will need to use needle-nose pliers and read the diagram on the cover to more easily find the position of the damaged fuse and replace it with one of the same amperage.

Posted on 14 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the internal fuse box of the Fiat Panda 3 located?
Where is the internal fuse box of the Fiat Panda 3 located?
Fiat Panda (2012-2026 / 319, MK 3) The Fiat Panda model 3, from 2012-2018, contains two fuse boxes. The first fuse box is located inside the cabin, specifically under the dashboard on …
Where is the fuse box located in the Fiat Panda?
Where is the fuse box located in the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) The Fiat Panda model 169, from 2012, contains two fuse boxes. The first fuse box is located inside the cabin, on the left side of the dashboard. Insi…
Where are the fuse box, battery, and OBD port of the Fiat Panda located?
Where are the fuse box, battery, and OBD port of the Fiat Panda located?
Fiat Panda (2003-2012 / 169, MK 2) The Fiat Panda, model mk2, has two fuse boxes and an OBD port inside. The first fuse box is installed inside the cabin behind a part of the dashboard…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the inertia switch on the Fiat Panda? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos