Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Fiat Panda 3

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Battery

Today we will explain how to replace the battery of the Fiat Panda model 3. To perform the battery replacement, we need to open the front hood of the car and immediately after, using a socket wrench and a 13 extension socket, we unscrew the support strap. After removing the support strap, we start by disconnecting the negative pole, open the clamp tab and release it, make sure the cable is well detached and pull the positive pole clamp using a 10 socket wrench, remove the clamp and extract the battery. Using sandpaper, we scrape the clamps to remove the layer of rust that may have formed due to wear. Insert the new battery and connect the positive pole by tightening with the 10 socket wrench, and after mounting the cover, connect the negative pole clamp.

Posted on 10 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery on a Fiat Panda
How to Replace the Remote Battery on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Hello, today you will learn how to replace the battery in the remote for your Fiat Panda. This is a task that anyone can do as it is very straightfor…
Replacing the Battery of the Fiat Panda
Replacing the Battery of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today, you will see in this tutorial how to disassemble and replace the battery of the Fiat Panda in simple and quick steps. First, open the bonnet o…
How to Replace the Battery on a Fiat Panda 1.3 MultiJet
How to Replace the Battery on a Fiat Panda 1.3 MultiJet
Fiat Panda (2012-2026 / 319, MK 3) In this video, you will learn how to replace the battery on a Fiat Panda 1.3 MultiJet. Before replacing the battery, ensure you have purchased the co…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos