Fiat Panda - Body - DIY video guides

Do it yourself

Frequently asked questions about cars and motorcycles

Car tutorial (Do it yourself)

Motorcycle tutorial (Do it yourself)

Frequently Asked Questions

Car
Fiat
Panda

Fiat Panda - Body

Years 2012-2026
Years 2012-2021
Years 2003-2012
Years 1980-2003

Body Fiat Panda (2012-2026 / 319, mk 3)

Fiat Panda (2012-2026 / 319, MK 3)
Where is the fuse box located in the hood of the Fiat Panda?
The Fiat Panda has two fuse boxes inside, but today we will specifically see the box located inside the front hood, which is specifically on the left side of …Read all…
Posted on 14 August 2024 by ScegliAuto

Fiat Panda (2003-2012 / 169, MK 2)
Aesthetic Transformation of a Fiat Panda on a Tight Budget
In this video, we see how to refresh the aesthetics of a battered Fiat Panda on a very tight budget: start by sanding the plastic parts with progressively …Read all…
Posted on 24 September 2026 by ScegliAuto

Fiat Panda (2003-2012 / 169, MK 2)
How to Remove the Wing of the Fiat Panda 169
To remove the wing of the Fiat Panda, start by unscrewing the 3 bolts of the wing by opening the bonnet. Open the door next to the wing, unscrew the upper bolt …Read all…
Posted on 12 August 2026 by ScegliAuto

Fiat Panda (2003-2012 / 169, MK 2)
How to Fit Roof Bars on the Fiat Panda Version 169
In this video, see how to fit roof bars on the Fiat Panda version 169: we have already installed the cross bars on our car (also known as "rails"), while the …Read all…
Posted on 1 August 2026 by ScegliAuto

Fiat Panda (2012-2026 / 319, MK 3)
How to Repair the Carpet of a Fiat Panda
In this video tutorial, see how to repair the carpet of the new Fiat Panda by following a few simple steps that will help you work independently. The first …Read all…
Posted on 19 September 2026 by ScegliAuto

Fiat Panda (2003-2012 / 169, MK 2)
How to Remove the Bonnet on Fiat Panda 169
Are you curious about how to remove the engine bonnet on the Fiat Panda 169 to replace it with a new one, repair it from a dent, or repaint it? In this brief …Read all…
Posted on 30 August 2026 by ScegliAuto

Fiat Panda (2012-2021 / )
How to open the bonnet of a Fiat Panda.
Opening the bonnet is a good practice to ensure everything is in order under the engine bay; even if you know little about engines, it is wise to regularly …Read all…
Posted on 13 August 2026 by ScegliAuto

Fiat Panda (2012-2026 / 319, MK 3)
How to Replace the "Fiat" Logo on the Fiat Panda?
To remove and replace the trim with the "Fiat" logo both front and rear, follow these steps: the logo is fixed with adhesive, so heat the logo using a …Read all…
Posted on 6 July 2026 by ScegliAuto

Fiat Panda (1980-2003 / 141, MK 1)
How to Adjust the Bonnet Lock on the Fiat Panda
This guide will show you the steps to adjust the bonnet lock on the Fiat Panda. First, open the bonnet by pulling the lever inside, and use a socket or star …Read all…
Posted on 4 July 2026 by ScegliAuto

Fiat Panda (2003-2012 / 169, MK 2)
How to remove the left front door panel on the Fiat Panda
In this video, you can see how to remove the left front door panel on the Fiat Panda W169. First, open the left front door of the Fiat Panda; then, the first …Read all…
Posted on 13 June 2026 by ScegliAuto

Fiat Panda (2003-2012 / 169, MK 2)
How to Remove the Rear Panel on a Fiat Panda
Good morning everyone, today we will see how to remove the rear panel on a Fiat Panda. This operation can be useful when we need to work on the wiper motor, …Read all…
Posted on 1 April 2026 by ScegliAuto

Fiat Panda (2003-2012 / 169, MK 2)
How to Open the Bonnet of a Fiat Panda
Learn how to open the bonnet of a Fiat Panda. Open the door (driver's side) and pull the lever located at the bottom left of the dashboard, then lift the …Read all…
Posted on 31 March 2026 by ScegliAuto

Fiat Panda (1980-2003 / 141, MK 1)
Replacing the Car Bumper
Car bumpers often suffer damage, either due to the actions of other drivers or due to the owner's inattention or misfortune. Knowing how to remove a bumper and …Read all…
Posted on 5 March 2026 by ScegliAuto

Fiat Panda (1980-2003 / 141, MK 1)
Installing a Gas Strut for the Bonnet on a Fiat Panda
A very practical and effective solution is to install a gas strut to support the front bonnet, making it easier to open, holding it during maintenance, and …Read all…
Posted on 4 March 2026 by ScegliAuto

Fiat Panda (1980-2003 / 141, MK 1)
Fuel Tank Removal Instructions
To remove the fuel tank, position the vehicle on suitable car stands to facilitate access to the underbody; then disconnect the hose connecting the filler cap …Read all…
Posted on 24 February 2026 by ScegliAuto

Body Fiat Panda (2012-2021 / )

Body Fiat Panda (2003-2012 / 169, mk 2)

Body Fiat Panda (1980-2003 / 141, mk 1)

Cigarette lighter (4) Airbag (15) Alternator (4) Speaker (1) Shocks (18) Antenna (1) Air conditioning (4) Car stereo (38) Anti-roll bar (1) Roof rack bars (5) Battery (13) Ignition coil (2) Air vents (2) Control arm (3) Transmission (9) Spark plugs (18) Glow plugs (2) Carburetor (2) Body (15) Glove compartment (2) Snow chains (1) Control unit (4) Key (25) Timing belt (34) V-belt (3) Air conditioner (1) A/C controls (2) Onboard computer (8) Checks and maintenance (71) Throttle body (2) Dashboard (14) Shifter boot (5) CV boot (5) Bearing (7) MAF sensor (1) Differential (4) Brake rotors (3) Wheel spacers (1) Headlight (31) Tail light (18) Fog lights (10) Air filter (29) Cabin air filter (35) Fuel filter (4) Diesel fuel filter (7) Oil filter (10) Parking brake (5) Clutch (9) Grille (1) Fuel injectors (4) Accessory kit (5) Light bulb (20) Side marker bulb (2) Headlight bulb (29) Tail light bulb (13) Interior dome light bulb (2) Antifreeze coolant (5) Instrument panel light (12) License plate light (5) (1) Handle (3) Exhaust muffler (6) Engine (10) Power window motor (4) Starter motor (8) Transmission fluid (5) Engine oil (16) Clock (36) Door trim panel (22) Windshield (3) Front bumper (10) Rear bumper (8) Brake pads (18) Hydraulic pistons (3) Shift knob (16) Pump (12) Fuel pump (15) Car door (6) Push button (1) Instrument cluster (11) Radiator (7) Heater core (11) Wheel (3) Fuse box (36) Seat (33) Axle shaft (4) Crankshaft position sensor (3) Parking sensors (3) Door lock (11) Suspension system (2) Side mirror (24) Rearview mirror (2) Warning light – error code (21) (22) Tire pressure warning light (9) Service warning light (44) Manufacturer emblem (2) Engine mount (3) Brake drums and shoes (4) Fuel cap (3) Windshield wipers (20) Thermostat (12) Cylinder head (1) Tie rods (2) Drivetrain (11) Center console tunnel (2) Turbocharger (1) Windshield washer nozzle (2) Valve (2) EGR valve (3) Blower motor (5) Side window (4) Steering wheel (14)

How to change the time on a Toyota Yaris

In this video we see how to change the time on a Toyota Yaris, specifically when it comes to switching from daylight saving time to standard time and vice versa. We go to the multifunction screen and press "settings": from there we go to press the clock, simply click on daylight saving time, and the clock will change the time for us, without doing anything else. All we want to do is just adjust the time format to 12 or 24 hours, as is customary in the area where we live: for example in Anglo-Saxon countries it is common to set the time to 12 hours, while in the European Union it is normally set to 24 hours.

Watch the video!

by ScegliAuto