Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Front bumper

Fiat Panda - Front bumper

Fiat Panda (2003-2012 / 169, MK 2)
How to remove the front bumper of the Fiat Panda?
The front bumper of the Fiat Panda is held in place by a series of bolts located in the lower part of the bumper, under the grille and under the stone guard. …read all…
Posted on 20 October 2022 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
Removing the front bumper Fiat Panda
Hello everyone! In this tutorial you will be shown how to remove the front bumper on old model Fiat Panda. Although it is possible to remove the bumper of the …read all…
Posted on 11 March 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to remove the front bumper of a Fiat Panda
Before starting, we will have to open the front hood of our Fiat Panda. So let's start by disassembling and removing the front grille, unscrewing the relative …read all…
Posted on 2 February 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
Replacement fender on Fiat Panda
Raise the hood and put on the appropriate support rod. Start by removing the front grille fixed by 4 Phillips screws placed above it. By doing so you will have …read all…
Posted on 12 January 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
Removing the front bumper on Fiat Panda
Loosen the bolts of the front wheels, lift the car with a jack and unscrew them completely, in order to remove the same. Unscrew the screws and nuts (one on …read all…
Posted on 9 January 2024 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
Removing the front bumper Fiat Panda
In this video tutorial we will see how to remove the front bumper of a Fiat Panda first series. First we have to disassemble the wheel guards by unscrewing the …read all…
Posted on 14 December 2023 by ScegliAuto
Fiat Panda (2012-2023 / MK 3, 319)
How to mount a front bumper on Fiat Panda
How to fit a front bumper on Fiat Panda? Let's see together how to proceed, an operation not too complex if you proceed in order. First of all we take the …read all…
Posted on 20 October 2023 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to replace the front bumper of Fiat Panda
Obviously, start by unhooking the hood from the special lever to then be able to lift it and fix it with the appropriate rod, then in this way you can unscrew …read all…
Posted on 8 October 2023 by ScegliAuto
Cigarette Lighter (3) Airbags (10) Alternator (4) Shock absorbers (15) Antenna (1) Air conditioning (4) Car stereo (33) Roof Rack Bars (4) Battery (9) Coil (2) Air Vents (2) Arm (2) Gearbox (9) Spark plugs (16) Glow plugs (2) Carburetor (1) Bodywork (10) Glove box (2) Control unit (3) Key (16) Timing belt (20) V-belt (3) Air conditioning controls (1) -board computer (16) Checks and maintenance (97) Throttle body (2) Dashboard (13) Gearshift gaiter (3) Drive shaft boot (5) Bearing (6) Mass air flow sensor (1) Differential (3) Brake discs (3) Spacers (1) Headlight (21) Tail light (14) Fog lights (10) Air filter (21) Cabin air filter (28) Petrol filter (4) Diesel filter (6) Oil filter (9) Hand brake (5) Clutch (8) Grille (1) Injectors (4) Accessory Kit (6) Light bulb (16) Side turn signal light bulb (1) Headlight bulb (22) Rear light bulb (10) Interior lights ceiling light bulb (2) Antifreeze liquid (4) Dashboard light (12) License plate light (3) Handle (2) Muffler (5) Engine (10) Window motor (4) Starter motor (4) Gear oil (4) Engine oil (13) Door panel (20) Windshield (3) Front bumper (8) Rear bumper (7) Brake pads (15) Hydraulic pistons (4) Tires (4) Gear Shift Knob (14) Pump (10) Fuel pump (14) Door (5) Push button (1) Instrument cluster (22) Radiator (7) Passenger compartment heating radiator (9) Wheel (2) Fuse box (21) Seat (30) Drive shaft (4) Crankshaft RPM sensor (3) Parking sensors (3) Lock (10) Suspensions (2) Outside rearview mirror (22) Interior rearview mirror (2) Manufacturer's coat of arms (2) Engine mount (3) Drums and shoes (4) Windscreen wipers (16) Thermostat (11) Engine head (1) Steering rods (2) Transmission (10) Central tunnel (2) Turbine (1) Windshield washer nozzle (2) Valve (2) EGR valve (2) Interior blower (4) Side window (3) Steering wheel (13)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos