Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Clutch

Fiat Panda - Clutch

Fiat Panda (2003-2012 / 169, MK 2)
Replacement of the clutch of the Fiat Panda 1.4
Today's guide will show us the process of disassembling and replacing the clutch of the Fiat Panda 1.4. First, we open the hood and start by removing the …read all…
Posted on 26 March 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to replace the clutch cable in the Panda.
Changing the clutch cable on a Fiat Panda is not a difficult operation. First, you will need to remove the battery and air filter assembly as shown in the …read all…
Posted on 31 May 2023 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to remove and replace the Fiat Panda clutch
Today we will see the main steps that will allow us to disassemble and replace the Fiat Panda clutch kit, following the instructions below. First of all we …read all…
Posted on 4 November 2022 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How do you replace the Fiat Panda clutch?
In order to replace the clutch on the Fiat Panda, the car must be lifted with a jack so that the front wheels are not in contact with the floor: at this point …read all…
Posted on 22 December 2022 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How do you replace the Fiat Panda clutch?
In order to replace the clutch on the Fiat Panda, it will be necessary to lift the car using a bridge, so that the components of the lower part can be worked …read all…
Posted on 27 November 2022 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
Replacing the clutch on the Fiat Panda 900 Mk1
In this video tutorial we will see how to remove and replace the clutch plates on the Fiat Panda 900 first series, following the instructions below. First we …read all…
Posted on 21 February 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
Disassembly of the Fiat Panda clutch
In today's video tutorial we will see how to remove the clutch of a Fiat Panda. We lift the car with stands and we go to remove the front wheels, unscrewing …read all…
Posted on 26 December 2023 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
Remove the clutch cable on a Fiat Panda
Let's see in this video how to remove the clutch cable on a Fiat Panda. We lift the bonnet and put it in safety, then, with a socket wrench, unscrew the …read all…
Posted on 11 October 2023 by ScegliAuto
Cigarette Lighter (3) Airbags (10) Alternator (4) Shock absorbers (15) Antenna (1) Air conditioning (4) Car stereo (33) Roof Rack Bars (4) Battery (9) Coil (2) Air Vents (2) Arm (2) Gearbox (9) Spark plugs (16) Glow plugs (2) Carburetor (1) Bodywork (10) Glove box (2) Control unit (3) Key (16) Timing belt (20) V-belt (3) Air conditioning controls (1) -board computer (16) Checks and maintenance (97) Throttle body (2) Dashboard (13) Gearshift gaiter (3) Drive shaft boot (5) Bearing (6) Mass air flow sensor (1) Differential (3) Brake discs (3) Spacers (1) Headlight (21) Tail light (14) Fog lights (10) Air filter (21) Cabin air filter (28) Petrol filter (4) Diesel filter (6) Oil filter (9) Hand brake (5) Clutch (8) Grille (1) Injectors (4) Accessory Kit (6) Light bulb (16) Side turn signal light bulb (1) Headlight bulb (22) Rear light bulb (10) Interior lights ceiling light bulb (2) Antifreeze liquid (4) Dashboard light (12) License plate light (3) Handle (2) Muffler (5) Engine (10) Window motor (4) Starter motor (4) Gear oil (4) Engine oil (13) Door panel (20) Windshield (3) Front bumper (8) Rear bumper (7) Brake pads (15) Hydraulic pistons (4) Tires (4) Gear Shift Knob (14) Pump (10) Fuel pump (14) Door (5) Push button (1) Instrument cluster (22) Radiator (7) Passenger compartment heating radiator (9) Wheel (2) Fuse box (21) Seat (30) Drive shaft (4) Crankshaft RPM sensor (3) Parking sensors (3) Lock (10) Suspensions (2) Outside rearview mirror (22) Interior rearview mirror (2) Manufacturer's coat of arms (2) Engine mount (3) Drums and shoes (4) Windscreen wipers (16) Thermostat (11) Engine head (1) Steering rods (2) Transmission (10) Central tunnel (2) Turbine (1) Windshield washer nozzle (2) Valve (2) EGR valve (2) Interior blower (4) Side window (3) Steering wheel (13)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos