Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Brake drums and shoes

Fiat Panda - Brake drums and shoes

Brake Drums And Shoes Fiat Panda (2003-2012 / 169, mk 2)

Fiat Panda (2003-2012 / 169, MK 2)
How to Replace the Rear Brake Shoes on a Fiat Panda
To replace the rear brake shoes on a Fiat Panda, lift the car with a jack or ramp so that the corresponding rear wheel is not in contact with the ground: then …Read all…
Posted on 25 September 2026 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
Removing the Rear Brake Shoes on a Fiat Panda
Loosen the bolts of the affected rear wheel, lift the vehicle, and completely unscrew them to remove the wheel. Unscrew the two fastening elements of the drum. …Read all…
Posted on 10 June 2026 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
Replacing the Rear Drums and Shoes on Fiat Panda 169
Loosen the bolts on one of the rear wheels and lift the vehicle on this side, then place a suitable safety jack. Remove the wheel after unscrewing the bolts. …Read all…
Posted on 25 May 2026 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to Change the Rear Drum Brake and Pads on a Fiat Panda
Follow this guide to change the rear drum brake and pads on a Fiat Panda. First, lift the car on a column jack to the desired height; then remove the wheel …Read all…
Posted on 31 March 2026 by ScegliAuto
Cigarette lighter (4) Airbag (15) Alternator (4) Speaker (2) Shocks (18) Antenna (1) Air conditioning (4) Car stereo (38) Anti-roll bar (1) Roof rack bars (5) Battery (13) Ignition coil (2) Air vents (2) Control arm (3) Transmission (9) Spark plugs (19) Glow plugs (2) Carburetor (2) Body (15) Glove compartment (2) Snow chains (1) Control unit (4) Key (25) Timing belt (35) V-belt (3) Air conditioner (1) A/C controls (2) Onboard computer (8) Checks and maintenance (72) Throttle body (2) Dashboard (14) Shifter boot (5) CV boot (5) Bearing (7) MAF sensor (1) Differential (4) Brake rotors (3) Wheel spacers (1) Headlight (31) Tail light (18) Fog lights (10) Air filter (29) Cabin air filter (36) Fuel filter (4) Diesel fuel filter (7) Oil filter (10) Parking brake (5) Clutch (9) Grille (1) Fuel injectors (4) Accessory kit (5) Light bulb (20) Side marker bulb (2) Headlight bulb (30) Tail light bulb (13) Interior dome light bulb (2) Antifreeze coolant (5) Instrument panel light (12) License plate light (5) (1) Handle (3) Exhaust muffler (6) Engine (10) Power window motor (4) Starter motor (8) Transmission fluid (5) Engine oil (16) Clock (36) Door trim panel (22) Windshield (3) Front bumper (10) Rear bumper (8) Brake pads (18) Hydraulic pistons (3) Shift knob (16) Pump (12) Fuel pump (15) Car door (6) Push button (1) Instrument cluster (11) Radiator (7) Heater core (11) Wheel (3) Fuse box (37) Seat (33) Axle shaft (4) Crankshaft position sensor (3) Parking sensors (3) Door lock (11) Suspension system (2) Side mirror (24) Rearview mirror (2) Warning light – error code (21) Tire pressure warning light (33) Service warning light (44) Manufacturer emblem (2) Engine mount (3) Brake drums and shoes (4) Fuel cap (3) Windshield wipers (21) Thermostat (12) Cylinder head (1) Tie rods (2) Drivetrain (11) Center console tunnel (2) Turbocharger (1) Windshield washer nozzle (2) Valve (2) EGR valve (3) Blower motor (5) Side window (4) Steering wheel (14)

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos