Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Shoes on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Brake drums and shoes

To replace the rear brake shoes on a Fiat Panda, lift the car with a jack or ramp so that the corresponding rear wheel is not in contact with the ground: then loosen the bolts securing the wheel and remove it completely. Next, remove the additional screws underneath that secure the drum: underneath, you will find the brake shoes, which need to be removed from their seat by detaching them from the corresponding spring. At this point, you can install the new brake shoes, reassembling all the removed components.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Drum and Shoes on a Fiat Panda 169
How to Replace the Rear Drum and Shoes on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial, learn how to remove and replace the rear brake shoes on a Fiat Panda 169, second series. First, remove the rear wheel; then unsc…
Replacing Rear Brake Shoes on Fiat Panda 169
Replacing Rear Brake Shoes on Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video shows how to remove and replace the rear brake shoes on a Fiat Panda 169, second series. First, lift the vehicle and remove the rear wheel…
How to Replace the Rear Brake Shoes on a Fiat Panda
How to Replace the Rear Brake Shoes on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, see how to replace the rear brake shoes on a second-generation Fiat Panda, produced from 2003 to 2012. First, lift the vehicl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos