Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Brake Shoes on Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Brake pads

This video shows how to remove and replace the rear brake shoes on a Fiat Panda 169, second series. First, lift the vehicle and remove the rear wheel by unscrewing its bolts; then remove the two retaining pins of the drum, so you can lever it out later, as shown in the video. At this point, disconnect the cable from the handbrake adjuster and remove the springs from the shoes with a sharp tool; all that's left is to remove them and replace them with new ones, following the video tutorial to the end!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Drum and Shoes on a Fiat Panda 169
How to Replace the Rear Drum and Shoes on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial, learn how to remove and replace the rear brake shoes on a Fiat Panda 169, second series. First, remove the rear wheel; then unsc…
How to Replace the Rear Brake Shoes on a Fiat Panda
How to Replace the Rear Brake Shoes on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear brake shoes on a Fiat Panda, lift the car with a jack or ramp so that the corresponding rear wheel is not in contact with the gro…
Removing the Rear Brake Shoes on a Fiat Panda
Removing the Rear Brake Shoes on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Loosen the bolts of the affected rear wheel, lift the vehicle, and completely unscrew them to remove the wheel. Unscrew the two fastening elements of…

    Frequently Asked Questions

    • Panda 2012-2026 - How much does it cost to replace the brake pads of a Fiat Panda? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos