Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Drums and Shoes on Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Brake drums and shoes

See other generations:
Video tutorial

Loosen the bolts on one of the rear wheels and lift the vehicle on this side, then place a suitable safety jack. Remove the wheel after unscrewing the bolts.

To remove the drum, simply unscrew the two bolts with a 12 mm socket. Disconnect the brake fluid pipe by unscrewing the screw.

Remove the central round cover by tapping the slot with a medium flat screwdriver. Using a 32 mm socket, unscrew the bearing bolt now exposed and extract it. Unscrew the two screws now accessible with a 6 mm Torx. Follow the procedure in the video to remove the shoes and you're done.

The removal of the drums and shoes is similar on almost all car models.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Drum and Shoes on a Fiat Panda 169
How to Replace the Rear Drum and Shoes on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial, learn how to remove and replace the rear brake shoes on a Fiat Panda 169, second series. First, remove the rear wheel; then unsc…
Replacing Rear Brake Shoes on Fiat Panda 169
Replacing Rear Brake Shoes on Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video shows how to remove and replace the rear brake shoes on a Fiat Panda 169, second series. First, lift the vehicle and remove the rear wheel…
Removing the Rear Brake Shoes on a Fiat Panda
Removing the Rear Brake Shoes on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Loosen the bolts of the affected rear wheel, lift the vehicle, and completely unscrew them to remove the wheel. Unscrew the two fastening elements of…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos