Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Fluid in a Fiat Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Brake fluid

See other generations:
Video tutorial

To replace the brake fluid in a Fiat Punto, lift the car using a jack so that the wheels are off the ground. Remove the wheel bolts to take off the wheels completely, allowing access to the brake calipers underneath.

There will be a small cap for the brake fluid reservoir: unscrew it and connect a tube to it with a bottle at the end, as shown in the tutorial. This will allow you to siphon out the old fluid and top up from the bleed valve located at the top left of the engine bay.


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to Bleed and Replace the Brake Fluid on the Fiat Punto
How to Bleed and Replace the Brake Fluid on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) This guide will show you how to bleed and replace the brake fluid in the braking system of the Fiat Punto in simple steps. First, open the bonnet and…
How to Top Up the Engine Oil and Brake Fluid on a Fiat Punto
How to Top Up the Engine Oil and Brake Fluid on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, we will see how to top up the brake fluid and engine oil on a Fiat Punto, following these simple and quick steps. First, open…
How to Replace the Brake Pump in the Fiat Grande Punto?
How to Replace the Brake Pump in the Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the brake pump in the Fiat Grande Punto, open the bonnet to access the engine bay. The pump is located immediately under the windscreen an…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos