Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Engine Oil and Brake Fluid on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Brake fluid

See other generations:
Video tutorial

In this video tutorial, we will see how to top up the brake fluid and engine oil on a Fiat Punto, following these simple and quick steps. First, open the bonnet and start by removing the engine oil dipstick; check the level and top up if necessary.

Next, unscrew the brake fluid cap, checking the level on the reservoir; top up with new fluid if it is below the maximum level mark. Finally, check the engine coolant level!


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Bleed and Replace the Brake Fluid on the Fiat Punto
How to Bleed and Replace the Brake Fluid on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) This guide will show you how to bleed and replace the brake fluid in the braking system of the Fiat Punto in simple steps. First, open the bonnet and…
How to replace the engine oil and oil filter of the Fiat Grande Punto 1.2 8V.
How to replace the engine oil and oil filter of the Fiat Grande Punto 1.2 8V.
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The information provided in this guide will show us how to perform the regular maintenance service, replacing the engine oil and oil filter, of the F…
Where is the windscreen washer fluid reservoir located in the Fiat Punto?
Where is the windscreen washer fluid reservoir located in the Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you can see where the windscreen washer fluid reservoir is located in the Fiat Punto, useful in case you need to top it up. As shown, …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos