Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the brake pump on the Fiat Grande Punto?

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Pump

To be able to replace the brake pump on the Fiat Grande Punto, you have to open the bonnet to gain access to the engine compartment. The pump will be located immediately under the windshield and will be identifiable thanks to its yellow cap. In order to remove it, it will be necessary to disconnect the connectors that allow the detection of the brake oil level. Once the connectors have been removed, the bolts securing the supports can be loosened so that the pump can be removed. Once this has been removed, it will be possible to replace it and secure it with bolts and connecting it to the connectors.


Posted on 13 March 2024 by ScegliAuto



How to replace the fuel pump in the Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, Punto EVO, Grandepunto , MK 3) Replacing the fuel pump in the Fiat Grande Punto is a very simple operation, let's see how to proceed in this tutorial. First we remove the seat of t
How do i replace the fuel pump on the Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, Punto EVO, Grandepunto , MK 3) In order to replace the fuel pump of the Fiat Punto, the rear sofa must be completely lowered, so that its components can be accessed in the lower pa
Replacement of the front brake pads of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, Punto EVO, Grandepunto , MK 3) Let's find out in this guide the main instructions to be able to remove and replace the front brake pads of the Fiat Grande Punto. First of all we li

Other guides that may interest you

    Frequently Asked Questions

    • Punto 1999-2011 - How much does a pump cost for the Fiat Punto 1.3 Multijet? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos