Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pump on the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Pump

If you need to replace the brake pump on this vehicle, follow the instructions below and refer to the video. After opening the bonnet, locate the pump situated just below the windscreen behind the brake servo. Remove the oil reservoir located above the pump, loosening the hose clips underneath. Use a socket to unscrew the support bolts of the brake pump and also unscrew the nuts connecting the oil pipes to the pump itself. At this point, you will be able to slide out the pump and replace it with a new one.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pump in the Fiat Grande Punto?
How to Replace the Brake Pump in the Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the brake pump in the Fiat Grande Punto, open the bonnet to access the engine bay. The pump is located immediately under the windscreen an…
How to Replace the Fuel Pump on a Fiat Grande Punto?
How to Replace the Fuel Pump on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the fuel pump on a Fiat Punto, lower the rear seat completely to access the components underneath. Here you will find the pump cover, whic…
How to replace the water pump on a Fiat Punto?
How to replace the water pump on a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the water pump on a Fiat Punto, open the bonnet to access the components located inside the engine compartment: on the left side of the en…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos