Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Fiat Grande Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fuel pump

See other generations:
Video tutorial

To replace the fuel pump on a Fiat Punto, lower the rear seat completely to access the components underneath. Here you will find the pump cover, which must be removed by unscrewing the fastening screws to access the underlying components.

By disconnecting the hoses, you can extract the pump from its housing and then insert the new replacement part. Once the new pump is in place, close it with the cover and replace the seat.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump in a Fiat Grande Punto?
How to Replace the Fuel Pump in a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replacing the fuel pump in a Fiat Grande Punto is a very simple operation; let's see how to proceed in this tutorial. First, remove the rear bench se…
Where are the fuses located in the Fiat Grande Punto?
Where are the fuses located in the Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The fuses in the Fiat Grande Punto are located within two fuse boxes present in the vehicle: in this model, the first box can be found in the lower l…
Where are the fuses located on a Fiat Grande Punto?
Where are the fuses located on a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Each fuse in a Fiat Grande Punto is contained within one of the designated fuse boxes present in the vehicle. In this model, there are two boxes: one…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos