Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Pump Replacement on Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fuel pump

See other generations:
Video tutorial

In this tutorial, you will see the essential procedure for replacing the fuel pump on a Fiat Punto, second series model produced from 1999 to 2011. The pump is located under the rear seats, so the first thing to do is lift the rear seat base. Once done, remove the three screws that secure the plastic cover of the pump and take it off. Now, disconnect the two connectors from the pump and then remove the plastic ring that holds it in place; finally, you can remove the old fuel pump and replace it with a new one by following the reverse procedure.


Updated on 26 August 2026 by ScegliAuto


Related tutorials

Disassembly of the fuel pump of the Fiat Punto 1.1
Disassembly of the fuel pump of the Fiat Punto 1.1
Fiat Punto (1993-1999 / MK 1, 176) In this guide, we will see the information that will allow us to disassemble and replace the fuel pump of the Fiat Punto 1.1. First of all, we remove…
How to Remove the Fuel Pump from a Fiat Punto
How to Remove the Fuel Pump from a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) How to remove the fuel pump from a Fiat Punto? First, disconnect the battery cables, then remove the rear seat cushions of the car. Use a screwdriver…
How to Remove the Fuel Pump from a Fiat Punto
How to Remove the Fuel Pump from a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Learn how to remove the fuel pump from a Fiat Punto. First, disconnect the battery cables. Next, remove the rear seat cushions from the car. Use a so…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos