Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the fuel pump of the Fiat Punto 1.1

Model: Fiat Punto MK 1, 176 - Years 1993-1999
Part: Fuel pump

In this guide, we will see the information that will allow us to disassemble and replace the fuel pump of the Fiat Punto 1.1. First of all, we remove the rear seat, thus accessing the fuel pump cap; we unscrew the screws found on the sides to remove it, as shown in the video. At this point, we unscrew the fuel pump ring, using the appropriate key, then disconnect the gasoline pipes; we remove and replace the fuel pump with the new original one, also replacing the gasoline pipes if damaged.

Posted on 17 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on a Fiat Grande Punto?
How to Replace the Fuel Pump on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the fuel pump on a Fiat Punto, lower the rear seat completely to access the components underneath. Here you will find the pump cover, whic…
How to Replace the Fuel Pump in a Fiat Grande Punto?
How to Replace the Fuel Pump in a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Replacing the fuel pump in a Fiat Grande Punto is a very simple operation; let's see how to proceed in this tutorial. First, remove the rear bench se…
Fuel Pump Replacement on Fiat Punto
Fuel Pump Replacement on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this tutorial, you will see the essential procedure for replacing the fuel pump on a Fiat Punto, second series model produced from 1999 to 2011. T…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos