Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump in a Fiat Grande Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fuel pump

See other generations:
Video tutorial

Replacing the fuel pump in a Fiat Grande Punto is a very simple operation; let's see how to proceed in this tutorial. First, remove the rear bench seat, then open the large circular cap located in the centre.

Before removing the pump, disconnect the power connector and the upper hose, pressing both clips simultaneously. At this point, unscrew the outer ring; this operation may be difficult if the pump has never been removed before.

Finally, install the replacement following the exact reverse procedure.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump on a Fiat Grande Punto?
How to Replace the Fuel Pump on a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the fuel pump on a Fiat Punto, lower the rear seat completely to access the components underneath. Here you will find the pump cover, whic…
How to Remove the Fuel Pump from a Fiat Punto
How to Remove the Fuel Pump from a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) How to remove the fuel pump from a Fiat Punto? First, disconnect the battery cables, then remove the rear seat cushions of the car. Use a screwdriver…
Disassembly of the fuel pump of the Fiat Punto 1.1
Disassembly of the fuel pump of the Fiat Punto 1.1
Fiat Punto (1993-1999 / MK 1, 176) In this guide, we will see the information that will allow us to disassemble and replace the fuel pump of the Fiat Punto 1.1. First of all, we remove…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos