Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Wheel Bearing Replacement for Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Bearing

See other generations:
Video tutorial

In this guide, discover how to disassemble and replace the rear wheel bearing of the Fiat Panda by following these simple steps. First, lift the vehicle and start removing the rear wheel; then, disassemble and remove the brake drum by unscrewing the two extractor screws, as shown in the video.

At this point, unscrew the central nut of the bearing using a socket spanner with an extension; remove and replace the bearing with a new one, tapping it in until fully seated. Now, reassemble the drum and the wheel!


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wheel Bearing on a Fiat Panda 169?
How to Replace the Rear Wheel Bearing on a Fiat Panda 169?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear wheel bearing on a Fiat Panda 169, lift the car using a jack or ramp and loosen the bolts securing the rear wheel, completely rem…
Replacing the Rear Wheel Bearing on the Fiat Panda 4x4
Replacing the Rear Wheel Bearing on the Fiat Panda 4x4
Fiat Panda (1980-2003 / MK 1, 141) In today's tutorial, you will learn how to remove and replace the rear wheel bearing on the Fiat Panda 4x4 by following these simple and quick steps.…
How to Replace the Front Wheel Bearing on a Fiat Panda
How to Replace the Front Wheel Bearing on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the front wheel bearing on a Fiat Panda, lift the car so you can unscrew the bolts securing the corresponding front wheel. Once the wheel …

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos