Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel Bearing on a Fiat Panda 169?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Bearing

To replace the rear wheel bearing on a Fiat Panda 169, lift the car using a jack or ramp and loosen the bolts securing the rear wheel, completely removing it. Next, remove the cap from the wheel hub nut and loosen the nut itself to slide off the hub and the bearing. Once the parts are removed, install the new replacement parts and secure everything with the appropriate bolts. Finally, reinstall the wheel and secure it with the appropriate screws.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Rear Wheel Bearing Replacement for Fiat Panda
Rear Wheel Bearing Replacement for Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this guide, discover how to disassemble and replace the rear wheel bearing of the Fiat Panda by following these simple steps. First, lift the vehi…
How to Replace the Front Wheel Bearing on a Fiat Panda
How to Replace the Front Wheel Bearing on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the front wheel bearing on a Fiat Panda, lift the car so you can unscrew the bolts securing the corresponding front wheel. Once the wheel …
Replacing the Front Wheel Bearings on a Fiat Panda 169
Replacing the Front Wheel Bearings on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you will learn how to remove and replace the front wheel bearings on a Fiat Panda 169, second series. First, lift the vehicle…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos