Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Wheel Bearings on a Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Bearing

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the front wheel bearings on a Fiat Panda 169, second series. First, lift the vehicle and remove the front wheel by unscrewing the bolts; then unscrew the two fixing screws of the brake caliper to remove it, as shown in the video.

Next, remove the brake disc and disconnect the wheel hub to take it out; use a press to remove and replace the bearing with a new one, following the video until the end for reassembly!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Fiat Panda 169
How to Replace the Front Brake Pads on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video shows the steps to remove and replace the front brake pads on a Fiat Panda 169, second series. First, remove the front wheel by lifting th…
How to Replace the Front Wheel Bearing on a Fiat Panda
How to Replace the Front Wheel Bearing on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the front wheel bearing on a Fiat Panda, lift the car so you can unscrew the bolts securing the corresponding front wheel. Once the wheel …
How to Replace the Rear Wheel Bearing on a Fiat Panda 169?
How to Replace the Rear Wheel Bearing on a Fiat Panda 169?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear wheel bearing on a Fiat Panda 169, lift the car using a jack or ramp and loosen the bolts securing the rear wheel, completely rem…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos