Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Brake pads

This video shows the steps to remove and replace the front brake pads on a Fiat Panda 169, second series. First, remove the front wheel by lifting the vehicle with a jack and taking off the wheel cover and bolts. Next, remove the two retaining clips for the brake pads, extracting the two pins as shown in the video. At this point, you can remove the brake caliper from the disc and take out the old pads; clean the caliper and correctly fit the new pads!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Brake Discs and Pads on a Fiat Panda
How to Remove the Front Brake Discs and Pads on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, see how to replace the front brake discs and pads on a Fiat Panda. First, loosen the wheel bolts, then lift the car with a hy…
How to Replace the Rear Brake Shoes on a Fiat Panda
How to Replace the Rear Brake Shoes on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear brake shoes on a Fiat Panda, lift the car with a jack or ramp so that the corresponding rear wheel is not in contact with the gro…
How to Replace the Rear Drum and Shoes on a Fiat Panda 169
How to Replace the Rear Drum and Shoes on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial, learn how to remove and replace the rear brake shoes on a Fiat Panda 169, second series. First, remove the rear wheel; then unsc…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - How much does it cost to replace the brake pads of a Fiat Panda? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos