Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to change the brake pads of a fiat Panda

Fiat Panda - Video tutorial

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Brake pads
Operation: How to change the brake pads of a fiat Panda

Let's see how to replace the front brake pads on a Fiat Panda. We raise the car on a column point (jack) to the desired height, immediately after we go to remove the rim (with a telescopic wrench or compressed air drill) with the respective pins. We unscrew the locking pin of the brake caliper, remove the same from the wheel support. We remove the pads from the caliper placed on the brake disc. Let's go and mount the new pads on the caliper; we mount the brake caliper with the holder. We tighten all the pins and mount the wheel. Let's get ready to carry out the same operations on the other calipers on the car.


Posted on 24 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Panda 2012-2023 - How much does it cost to replace the rear brake pads on a Fiat Panda? Read Answer
    • Panda 2012-2023 - How much does it cost to replace the brake pads of a Fiat Panda? Read Answer
    • Panda 2012-2023 - How much do the brake pads of the new Panda cost? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos