Do it yourself
| ||||
|
Fiat Panda - Video tutorial
Model: Fiat Panda
141, MK 1
- Years 1980-2003 Disassembly of the worn front disc brake pads worn out on a Fiat Panda disc, let's see the replacement. We lift the car on a jack to the desired height, immediately after we go to remove the rim (with a telescopic wrench) with the respective pins. We disassemble the brake caliper, remove it from the wheel support. With a screwdriver we detach the pads to be replaced from the wheel hub caliper, remove the brake caliper and then the disc. We mount the new pads on the caliper itself, mount the brake caliper with the holder on the disc. We mount the wheel and the locking pins of our Panda.
Posted on 3 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.030
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |