Do it yourself
| ||||
|
Fiat Panda - Video tutorial
Model: Fiat Panda
169, MK 2
- Years 2003-2012 How to remove the brake disc and the pads of the front brake disc of a Fiat Panda. We place our car on a column bridge, we lift to a comfortable height to intervene. We unscrew the pins with a telescopic wrench and remove the rim, then, we begin to unscrew the pins of the brake caliper by detaching it from the support. With a screwdriver we detach the brake pads. We unscrew the pins and remove the disc brake. We mount the new brake pads with all the pins attached, we tighten the caliper support to the disc, then, we mount the brake caliper, remembering to tighten all the pins well. Before mounting the rim, we bleed the brake caliper if necessary. Finally we assemble the circle with the pins.
Posted on 28 November 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to open the Piaggio Beverly saddle with a flat batteryIn today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |