Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Brake rotors

Fiat Panda - Brake rotors

Brake Rotors Fiat Panda (2003-2012 / 169, mk 2)

Fiat Panda (2003-2012 / 169, MK 2)
How to Replace the Front Brake Disc on a Fiat Panda 169
This brief tutorial explains how to replace the brake disc on a Fiat Panda model 169, produced from 2003 to 2012. First, lift the car and remove the front …Read all…
Posted on 30 August 2026 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
Replacing Brake Pads and Discs on a Fiat Panda
Let's look at replacing the brake disc and associated pads on a Fiat Panda. Lift the car to a comfortable working height, unscrew the bolts with a socket …Read all…
Posted on 26 May 2026 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
Removing the Brake Disc on a Fiat Panda
How to remove the brake disc and brake pads from the front of a Fiat Panda. Position the car on a column lift and raise it to a comfortable height for working. …Read all…
Posted on 6 April 2026 by ScegliAuto
Cigarette lighter (4) Airbag (15) Alternator (4) Speaker (1) Shocks (18) Antenna (1) Air conditioning (4) Car stereo (38) Anti-roll bar (1) Roof rack bars (5) Battery (13) Ignition coil (2) Air vents (2) Control arm (3) Transmission (9) Spark plugs (18) Glow plugs (2) Carburetor (2) Body (15) Glove compartment (2) Snow chains (1) Control unit (4) Key (25) Timing belt (34) V-belt (3) Air conditioner (1) A/C controls (2) Onboard computer (8) Checks and maintenance (71) Throttle body (2) Dashboard (14) Shifter boot (5) CV boot (5) Bearing (7) MAF sensor (1) Differential (4) Brake rotors (3) Wheel spacers (1) Headlight (31) Tail light (18) Fog lights (10) Air filter (29) Cabin air filter (35) Fuel filter (4) Diesel fuel filter (7) Oil filter (10) Parking brake (5) Clutch (9) Grille (1) Fuel injectors (4) Accessory kit (5) Light bulb (20) Side marker bulb (2) Headlight bulb (29) Tail light bulb (13) Interior dome light bulb (2) Antifreeze coolant (5) Instrument panel light (12) License plate light (5) (1) Handle (3) Exhaust muffler (6) Engine (10) Power window motor (4) Starter motor (8) Transmission fluid (5) Engine oil (16) Clock (36) Door trim panel (22) Windshield (3) Front bumper (10) Rear bumper (8) Brake pads (18) Hydraulic pistons (3) Shift knob (16) Pump (12) Fuel pump (15) Car door (6) Push button (1) Instrument cluster (11) Radiator (7) Heater core (11) Wheel (3) Fuse box (36) Seat (33) Axle shaft (4) Crankshaft position sensor (3) Parking sensors (3) Door lock (11) Suspension system (2) Side mirror (24) Rearview mirror (2) Warning light – error code (21) (22) Tire pressure warning light (9) Service warning light (44) Manufacturer emblem (2) Engine mount (3) Brake drums and shoes (4) Fuel cap (3) Windshield wipers (20) Thermostat (12) Cylinder head (1) Tie rods (2) Drivetrain (11) Center console tunnel (2) Turbocharger (1) Windshield washer nozzle (2) Valve (2) EGR valve (3) Blower motor (5) Side window (4) Steering wheel (14)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos