Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Transmission

Fiat Panda - Transmission

Fiat Panda (2003-2012 / 169, MK 2)
How to remove the driveshaft of the Fiat Panda 4x4.
Let's see in this guide how to disassemble the drive shaft, replacing the oil seal, of the Fiat Panda 4x4. First, we lift the car and begin to unscrew all the …read all…
Posted on 4 May 2023 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to replace the propshaft on Fiat Panda 169 4x4
Let's find out in this video the instructions that will allow us to be able to replace the transmission shaft on the Fiat Panda 169 4x4. First of all, we lift …read all…
Posted on 14 March 2024 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
Propeller shaft replacement on Fiat Panda 4x4
For this process it is necessary to be able to work with the auto raised and therefore be able to work under it. It is a process suitable for fairly …read all…
Posted on 31 January 2024 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
Panda 4x4 propshaft replacement
This video shows the essential operations, as well as the instrumentation necessary for disassembling the propeller shaft on a Panda 4x4. Lift the car with 4 …read all…
Posted on 17 December 2023 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
How to remove the propshaft on a Panda 4x4
We lift the car to work from below. Check the bolts securing the shaft to the transmission on the front of the car and the rear differential and apply release …read all…
Posted on 6 December 2023 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to change Fiat Panda transmission oil
Let's replace the transmission oil on Fiat Panda, let's see. We place our Panda on a column bridge and lift it to a comfortable height to intervene with the …read all…
Posted on 29 November 2023 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
Disassembly of the drive shaft on Fiat Panda
Let's see how to remove the transmission shaft on a Fiat Panda? We lift the car onto a column bridge, locate the transmission shaft. With a socket wrench we …read all…
Posted on 28 November 2023 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to change Fiat Panda 169 transmission cruise
The cardan joint (or Cardano joint) is technically a spatial articulated quadrilateral: it allows the transmission of motion between two non-coaxial shafts, or …read all…
Posted on 1 September 2023 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
Drive shaft disassembly instructions
To disassemble the drive shaft it is first necessary to evaluate how to unscrew the fixing nut from the hub side: rather than adopting the solution shown in …read all…
Posted on 22 August 2023 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
Guide on how to disassemble the drive shaft and gearbox
The narrator explains the investigations that were carried out following the vibrations and jolts encountered while driving and confirmed, after a careful …read all…
Posted on 22 June 2023 by ScegliAuto
Cigarette Lighter (3) Airbags (10) Alternator (4) Shock absorbers (15) Antenna (1) Air conditioning (4) Car stereo (33) Roof Rack Bars (4) Battery (9) Coil (2) Air Vents (2) Arm (2) Gearbox (9) Spark plugs (16) Glow plugs (2) Carburetor (1) Bodywork (10) Glove box (2) Control unit (3) Key (16) Timing belt (20) V-belt (3) Air conditioning controls (1) -board computer (16) Checks and maintenance (97) Throttle body (2) Dashboard (13) Gearshift gaiter (3) Drive shaft boot (5) Bearing (6) Mass air flow sensor (1) Differential (3) Brake discs (3) Spacers (1) Headlight (21) Tail light (14) Fog lights (10) Air filter (21) Cabin air filter (28) Petrol filter (4) Diesel filter (6) Oil filter (9) Hand brake (5) Clutch (8) Grille (1) Injectors (4) Accessory Kit (6) Light bulb (16) Side turn signal light bulb (1) Headlight bulb (22) Rear light bulb (10) Interior lights ceiling light bulb (2) Antifreeze liquid (4) Dashboard light (12) License plate light (3) Handle (2) Muffler (5) Engine (10) Window motor (4) Starter motor (4) Gear oil (4) Engine oil (13) Door panel (20) Windshield (3) Front bumper (8) Rear bumper (7) Brake pads (15) Hydraulic pistons (4) Tires (4) Gear Shift Knob (14) Pump (10) Fuel pump (14) Door (5) Push button (1) Instrument cluster (22) Radiator (7) Passenger compartment heating radiator (9) Wheel (2) Fuse box (21) Seat (30) Drive shaft (4) Crankshaft RPM sensor (3) Parking sensors (3) Lock (10) Suspensions (2) Outside rearview mirror (22) Interior rearview mirror (2) Manufacturer's coat of arms (2) Engine mount (3) Drums and shoes (4) Windscreen wipers (16) Thermostat (11) Engine head (1) Steering rods (2) Transmission (10) Central tunnel (2) Turbine (1) Windshield washer nozzle (2) Valve (2) EGR valve (2) Interior blower (4) Side window (3) Steering wheel (13)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos