Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Drive Shaft from a Fiat Panda 4x4

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Drivetrain

See other generations:
Video tutorial

In this guide, learn how to dismantle the drive shaft and replace the oil seal on a Fiat Panda 4x4. First, raise the vehicle and start unscrewing all the fastening bolts of the drive shaft, found on the sides. Then, disconnect the shaft from the differential to remove it, as shown in the video.

Next, remove the worn oil seal and replace it with a new one (inserting it until it is flush). Finally, remount the drive shaft, following the video tutorial to the end!


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to Replace the Drive Shaft on a Fiat Panda 169 4x4
How to Replace the Drive Shaft on a Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Discover in this video the instructions for replacing the drive shaft on a Fiat Panda 169 4x4. First, lift the vehicle and position the jack under th…
Removing the Drive Shaft on a Fiat Panda
Removing the Drive Shaft on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Learn how to remove the drive shaft on a Fiat Panda. Lift the car on a column lift and locate the drive shaft. Using a socket spanner, undo the secur…
Replacing Drive Shaft on Fiat Panda 4x4
Fiat Panda (1980-2003 / MK 1, 141) For this job, you need to work with the car raised and be able to work underneath it. This is a task suitable for reasonably experienced individuals.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos