Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear differential oil change for Fiat Panda Cross MK3.

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Differential

To replace the rear differential oil of the Fiat Panda Cross, we lift the rear of the car, passenger side, using a wedge, place a collection tank under the differential and unscrew the drain plug with an 18mm wrench and we will see the oil start to come out. We also unscrew the oil fill plug, with pliers we remove the plunger inside the drain hole and now let all the oil drain out by helping the operation by blowing inside with a cannula. After draining, we put back the plunger and the drain plug, using a syringe we inject the new oil, in the specified quantity, into the fill hole, screw the fill plug and lower the car.

Posted on 2 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Differential Oil on a Fiat Panda Cross
How to Replace the Differential Oil on a Fiat Panda Cross
Fiat Panda (2012-2026 / 319, MK 3) Here’s how to replace the differential oil on a Fiat Panda Cross. You will need a special 500 ml syringe; you can easily find one on eBay, starting f…
How to Change the Rear Differential Oil of the Fiat Panda 4x4 169
How to Change the Rear Differential Oil of the Fiat Panda 4x4 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial video, we will see how to change the rear differential oil on the Fiat Panda 4x4 169. Start by lifting the car and locating the p…
How to replace the rear differential silent blocks on the Fiat Panda 4x4?
How to replace the rear differential silent blocks on the Fiat Panda 4x4?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear differential silent blocks on the Fiat Panda 4x4, first loosen the bolt and nut securing the stabiliser bar at the rear. Once the…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos