Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear differential silent blocks on the Fiat Panda 4x4?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Differential

See other generations:
Video tutorial

To replace the rear differential silent blocks on the Fiat Panda 4x4, first loosen the bolt and nut securing the stabiliser bar at the rear. Once the stabiliser bar is removed, you can loosen the nut that secures the differential to its housing and extract the silent block inside.

To do this, use a hammer for a few taps: once the old silent block is removed, insert a new one and reassemble the differential and stabiliser bar.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Change the Rear Differential Oil of the Fiat Panda 4x4 169
How to Change the Rear Differential Oil of the Fiat Panda 4x4 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial video, we will see how to change the rear differential oil on the Fiat Panda 4x4 169. Start by lifting the car and locating the p…
How to Remove the Drive Shaft from a Fiat Panda 4x4
How to Remove the Drive Shaft from a Fiat Panda 4x4
Fiat Panda (2003-2012 / 169, MK 2) In this guide, learn how to dismantle the drive shaft and replace the oil seal on a Fiat Panda 4x4. First, raise the vehicle and start unscrewing all…
How to Remove the Fuel Pump on a Fiat Panda 4x4 (169)
How to Remove the Fuel Pump on a Fiat Panda 4x4 (169)
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, you will learn how to remove and replace the fuel pump or low-pressure fuel sender on a Fiat Panda 4x4 (169). First, open the rear …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos