Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Differential Oil on a Fiat Panda Cross

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Differential

See other generations:
Video tutorial

Here’s how to replace the differential oil on a Fiat Panda Cross. You will need a special 500 ml syringe; you can easily find one on eBay, starting from £19.85 (+£6.90 for delivery) and the differential oil, like the one in the video (Pakelo, SAE 75W90) can be found on Amazon for £36.71 per litre, delivery included.

Naturally, you will also need a container to drain the used oil (which we will dispose of at an authorised centre). From inside the cap, you will also need to remove the piston.

If possible, tilt the vehicle to help drain the fluid better. Perform a flush with the new oil using the syringe and then refill the oil and close the cap. Operation completed.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

Changing the Oil in the Rear Differential of the Fiat Panda Cross MK3
Changing the Oil in the Rear Differential of the Fiat Panda Cross MK3
Fiat Panda (2012-2026 / 319, MK 3) To replace the oil in the rear differential of the Fiat Panda Cross, lift the rear of the car on the passenger side using a wedge, place a collection…
How to Change the Rear Differential Oil of the Fiat Panda 4x4 169
How to Change the Rear Differential Oil of the Fiat Panda 4x4 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial video, we will see how to change the rear differential oil on the Fiat Panda 4x4 169. Start by lifting the car and locating the p…
How to Replace the Cabin Filter in a Fiat Panda Cross
How to Replace the Cabin Filter in a Fiat Panda Cross
Fiat Panda (2012-2026 / 319, MK 3) In this tutorial, you will see how to replace the cabin air filter in a Fiat Panda Cross, a very simple operation. It is located under the dashboard,…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos