Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Fiat Panda Cross

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Cabin air filter

In this tutorial, you will see how to replace the cabin air filter in a Fiat Panda Cross, a very simple operation. It is located under the dashboard, at the junction with the centre tunnel on the passenger side. Start by removing the panel containing the air vents, unscrewing the single screw with a Torx T25 spanner, then open the long rectangular flap and extract the old filter. Next, clean the housing of any debris and install the replacement, following the procedure in reverse, ensuring it is positioned the correct way round.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Filter on a Fiat Panda
How to Change the Cabin Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Learn how to change the cabin filter on a Fiat Panda. Identify the plastics to be removed to access the air filter. Detach the cover located at the b…
How to Remove the Pollen Filter in a Fiat Panda
How to Remove the Pollen Filter in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this guide, learn how to remove the pollen filter in a Fiat Panda. The cabin filter is located at the bottom left of the glove compartment (centra…
How to replace the cabin filter in the Fiat Panda?
How to replace the cabin filter in the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) In this tutorial we can see how to replace the cabin filter in the Fiat Panda, an extremely simple and quick operation. First of all, we open the pas…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos