Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located in the Fiat Panda 2?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Dashboard

In the following guide, we will discover where the OBD port is located inside the cabin of your Fiat Panda Mk2. All you have to do is get into the car and reach the driver's seat, then locate the cover on the lower left side of the dashboard. Next, use a Phillips screwdriver to unscrew the two screws. Once you have done that, remove the cover to finally have access to the OBD port you were looking for. Now that you know the location of the OBD port, you can connect any compatible diagnostic tool to it.

Posted on 9 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuse box, battery, and OBD port of the Fiat Panda located?
Where are the fuse box, battery, and OBD port of the Fiat Panda located?
Fiat Panda (2003-2012 / 169, MK 2) The Fiat Panda, model mk2, has two fuse boxes and an OBD port inside. The first fuse box is installed inside the cabin behind a part of the dashboard…
Where is the OBD port located on the Fiat Panda 2?
Where is the OBD port located on the Fiat Panda 2?
Fiat Panda (2003-2012 / 169, MK 2) To successfully find the OBD port in your Fiat Panda second series, all you need to do is follow the steps described in our new guide. First, open th…
Where is the OBD port of the Fiat Panda 3 located?
Where is the OBD port of the Fiat Panda 3 located?
Fiat Panda (2012-2026 / 319, MK 3) If you own a third series Fiat Panda and want to find out where the OBD port is located, all you have to do is read the following guide carefully and…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos