Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the dashboard of the Fiat Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Dashboard

The steps outlined in this guide will show us how to disassemble and replace the entire dashboard of the Fiat Panda. First, we get into the car and start by removing the steering wheel, then the dashboard glove compartment; we then remove the plastic cover of the heating controls and then the instrument panel, unscrewing the fixing screws and disconnecting the wiring on the back, as shown in the video. At this point, we remove the controls of the central instrumentation and then the entire dashboard, disconnecting the various electrical connectors.

Posted on 1 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda to access the engine bay. Begin by unfastening the clips that secure the air filter cover. T…
How to Remove the Horn from a Fiat Panda
How to Remove the Horn from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can begin, open the front bonnet of your Fiat Panda. Start by unscrewing and removing the screws that secure the front mask, then remove t…
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda to gain access to the engine bay. Begin by unfastening the securing clips of the air filter cover…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos