Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel of the Fiat Panda?

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Steering wheel

See other generations:
Video tutorial

To remove the steering wheel of the Fiat Panda, use a screwdriver to lever inside the two holes located on the lateral rear of the steering wheel. This will release the clips securing the airbag to its housing, allowing you to disconnect the connector underneath.

The airbag can then be completely removed by unscrewing the central nut of the steering wheel. You can now fully remove the steering wheel to fit the new one onto its column.

After installation, reconnect the airbag and secure it with the clips.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel from a Fiat Panda?
How to Remove the Steering Wheel from a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To remove the steering wheel from a Fiat Panda, loosen the two screws located at the back of the steering wheel, on the right and left sides. Once th…
How to Replace the Steering Wheel on a Fiat Panda
How to Replace the Steering Wheel on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this short tutorial, you will learn how to change the steering wheel on a Fiat Panda 169 in just a few minutes. This procedure is valid for many o…
Replacing the Steering Wheel on a First Series Panda
Replacing the Steering Wheel on a First Series Panda
Fiat Panda (2003-2012 / 169, MK 2) Removing the steering wheel from a Fiat Panda? This operation is not too complex, let's see how to do it. Disconnect the battery terminals in the eng…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos