Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Wheel Airbag on the Fiat Panda?

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Airbag

See other generations:
Video tutorial

To replace the steering wheel airbag on the Fiat Panda, you will need to leverage with an object like a screwdriver in the appropriate holes located at the bottom of the steering wheel: this will release the clips that hold the airbag in place. Once released, you can disconnect the connectors located at the back to completely remove it: the new airbag can then be connected and inserted into its place, securing it with the clips.

Now just ensure that no errors appear on the dashboard and that it does not move during driving.


Posted on 9 June 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel from a Fiat Panda
How to Remove the Steering Wheel from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can begin, sit in the driver's seat of your Fiat Panda. Start by turning the steering wheel 90 degrees to the right. This will give you ac…
How to Remove the Steering Wheel Airbag from a Fiat Panda
How to Remove the Steering Wheel Airbag from a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) How do you remove the steering wheel airbag from a Fiat Panda? In this video, learn how to proceed: disconnect the battery terminals located in the e…
How to Remove the Driver's Airbag from a Fiat Panda
How to Remove the Driver's Airbag from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the driver's airbag (steering wheel) from a Fiat Panda? This operation is straightforward if you follow the steps: insert a medium-leng…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos