Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Steering wheel

Before you can begin, sit in the driver's seat of your Fiat Panda. Start by turning the steering wheel 90 degrees to the right. This will give you access to the rear screws that secure the airbag to the steering wheel. Proceed to unscrew and remove these screws, then extract the airbag and disconnect the relevant electrical connectors. Once you have removed the airbag, you will reach the nut that secures the steering wheel to the steering column. At this point, unscrew and remove the securing nut, then remove the steering wheel itself, and you will have completed the disassembly.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel from a Fiat Panda?
How to Remove the Steering Wheel from a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To remove the steering wheel from a Fiat Panda, loosen the two screws located at the back of the steering wheel, on the right and left sides. Once th…
How to Replace the Steering Wheel on a Fiat Panda
How to Replace the Steering Wheel on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this short tutorial, you will learn how to change the steering wheel on a Fiat Panda 169 in just a few minutes. This procedure is valid for many o…
How to Remove the Steering Wheel from the Fiat Panda 141
How to Remove the Steering Wheel from the Fiat Panda 141
Fiat Panda (1980-2003 / 141, MK 1) In today's video, learn how to replace the steering wheel on the Fiat Panda 141 with a new boss unit. First, remove the central bearing. Now, using a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos