Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to remove the steering wheel airbag on Fiat Panda

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Airbags
Operation: How to remove the steering wheel airbag on Fiat Panda

How to remove the driver's side (steering wheel) airbag on Fiat Panda? Very simple operation if you follow the various steps, we see in this guide how to proceed: insert the screwdriver (medium length) in the rear slots located in the steering wheel and rotate to the left or right until the clips that hook the airbag are released. Once the airbag has been removed, we disconnect the power supply terminals and extract the same from the steering wheel. To reassemble the airbag: connect the power supply terminal, then press the same on the steering wheel with your hands, until the clips inside snap into place.


Posted on 14 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Panda 2003-2012 - What does the phrase "airbag malfunction" on the Fiat Panda indicate? Read Answer
    • Panda 2012-2023 - Why does the airbag failure warning light come on in the FIAT Panda? Read Answer
    • Panda 2003-2012 - Where are the airbag control sensors on the Fiat Panda 169 located? Read Answer
    • Panda 2012-2021 - Why did the airbag failure warning light come on in the Fiat Panda? Read Answer
    • Panda 2012-2021 - What to do in the event of a Fiat Panda airbag failure? Read Answer
    • Panda 2003-2012 - What does the Fiat Panda airbag failure warning light indicate? Read Answer
    • Panda 2012-2023 - Airbag warning light on on Fiat Panda Read Answer
    • Panda 2003-2012 - Where is the Fiat Panda 169 airbag control unit located? Read Answer

How do you replace the battery of the BMW R 1250 GS?

In order to replace the battery of the BMW R 1250 GS it is necessary to loosen the bolts that secure the casing positioned on the left side of the bike, so that its cover can be removed. Once this has been removed, you will be able to access the components below, including the battery. The latter must be removed from its housing by disconnecting the power cables and unscrewing the appropriate fixing bolts. In this way it will be possible to insert a new battery, properly fixing it and connecting it to the relative cables, covering everything with the casing.

Watch the video!


by ScegliAuto

More videos